Heat shrink cable markers TDRT18DS-2X25YE-PO-X-YE 20.10/9.53mm, 25mm, yellow, 3000 pcs. HellermannTyton
Oil-resistant and commonly used fluid resistant TDRT heat shrink markers with a shrink ratio of 2:1 are suitable for both printing on thermal transfer printers and laser marking. They are supplied as ladder sections of specified lengths, with a low emission of toxic gases and the ability to print on both sides. Available in yellow, with lengths of 50mm and 25mm.
Applications: Markers for use in places where resistance to diesel fuel, fluids, lubricants and solvents is required, such as public transport, aviation, marine and industrial installations.
Technical data:
Certificates/Approvals: LFH, RoHS
Type: Thin-walled
Printing method: Thermal transfer, laser burning
Wall thickness: 0.62mm
Longitudinal shrinkage: -10% max.
Minimum shrinkage temperature: +120ºC
Oxygen index: 26.3%
Dielectric strength: 19.7 kV/mm
Tensile strength: 13.8MPA
Elongation at break: 200%
Storage time: 36 months
Recommended ribbon type: TTDTHOUT
Recommended tool: H6100, TT431, TT4030, TrakMark DS
Data sheet
- Brand
- HellermannTyton
- Application
- cable and wire marking
- Material
- polyolefine cross-linked
- Material abbreviation
- PO-X
- Color
- yellow
- Length
- 25 mm
- Operating temperature
- -55°C / +135°C
- Operating temperature max
- high (100°C - 150°C)
- Operating temperature min
- very low (below -45°C)
- Chemical resistance
- standard
- UV resistance
- standard
- Packing
- 3000 pcs
- Weight
- 2.4 kg
Specific References
Related products
(16 other products in the same category)