SAFE STEP METAL PRIMER Rocol 750ml RS43265

SAFE STEP METAL PRIMER Rocol

SAFE STEP METAL PRIMER is a solvent based, 2-pack epoxy resin pigmented with zinc phosphate, designed for use as a fast drying, high performance primer for blast cleaned steel, aluminium and galvanising. It improves adhesion, product performance and coverage of the top coat, and gives excellent corrosion protection, even in the most extreme environments. The product contains max. 165g/l VOC.

Application: Priming of surfaces prior to the application of the SAFE STEP range of floor finishes, to promote effective adhesion and corrosion protection between the substrate surface and the floor finish.

Technical data:
Flammability: highly flammable
Flash point: 36ºC
Density (mixed): 1.5g/cm3
Volume solids: 85%
Mixing ratio by volume: 5 parts base to 1 part hardener
Usable life when mixed at 20ºC: 4h
Application film thickness: 88-100µm wet film; 75-85µm dry film
Theoretical coverage per litre: 10m2 at 100 microns wet film thickness
Curing time at 21ºC: touch dry after 2h, hard dry after 16h, full cure after 7 days
Over-coating time at 20ºC: min. 6h, max. 3 months
Application temperature: above +10ºC, relative humidity <90%
Cleaning solvent: xylene
Storage temperature: +5ºC - +30ºC
Shelf life: 2 years