Resistant to diesel fuel and commonly used fluids, TDRT heat shrink markers with a shrink ratio of 2:1 are suitable for both thermal transfer printing and laser marking. They are delivered in pre-cut lengths and feature low emission of toxic gases and the ability to print on both sides. Available in yellow, with lengths of 50mm and 25mm.
Application: Markers for use in areas where resistance to diesel fuel, fluids, greases, and solvents is required, such as public transportation, aviation, marine and industrial installations.
Technical data: Certificates/Approvals: LFH, RoHS Type: Thin-walled Printing method: Thermal transfer, laser etching Wall thickness: 0.63mm Longitudinal shrinkage: -10% max. Min. shrink temperature: +120ºC Oxygen index: 26.3% Dielectric strength: 19.7 kV/mm Tensile strength: 13.8MPA Elongation at break: 200% Storage life: 36 months Recommended ribbon type: TTDTHOUT Recommended tools: H6100, TT431, TT4030, TrakMark DS
White ladder-shaped heat shrink markers with dimensions of 12.7/6.4 mm and a length of 50 mm. The identification is printed with a thermal transfer printer. It has approvals according to EN 45545-2 (CEN/TS 45545-2), DIN 5510-2, BS-6853, DIN...
Thermoshrinkable markers in ladder form with dimensions of 4.8mm/2.4mm in yellow color. Marker length is 50mm. The marking is done with a thermal transfer printer. It has approvals according to EN 45545-2 (CEN/TS 45545-2), DIN 5510-2, BS-6853, DIN...
Thermoshrinkable ladder markers in white with dimensions of 6/2 mm. Marker length is 50 mm. The designation is printed using a thermal transfer printer.
Yellow 12.7/6.4mm ladder-shaped heat shrink markers with a length of 25mm. The label is printed using a thermal transfer printer. It has approvals according to EN 45545-2 (CEN/TS 45545-2), DIN 5510-2, BS-6853, DIN 53438-3, EN ISO 11925-2, NF F...
Thermoshrinkable markers in ladder form with dimensions of 3/1 mm in white color. Marker length is 25 mm. The label is printed using a thermal transfer printer.
Thermoshrinkable markers for printing 553-72500 from HellermannTyton, 2:1 ratio 2.4/1.2mm, 50mm, ladder format, thermotransfer, laser burning, PVDFX, white, 1000 pieces.
Thermoshrinkable markers in ladder form with dimensions of 12.7/6.4 mm in white color. The length of the marker is 25 mm. The marking is printed using a thermal transfer printer. It has approvals according to the EN 45545-2 (CEN/TS 45545-2), DIN...
White ladder-shaped heat shrink markers with dimensions of 4.8 mm/2.4 mm and a length of 50 mm. The marking is printed using a thermal transfer printer. It has approvals according to EN 45545-2 (CEN/TS 45545-2), DIN 5510-2, BS-6853, DIN 53438-3,...
A non-halogenated heat shrink tube with dimensions of 19 mm/9.5 mm in yellow color for producing heat shrinkable cable markers. The marking is printed using a thermal transfer printer. It has approvals according to standards EN 45545-2 (CEN/TS...